Tips From the Moving Company Pros: The Best Ways To Move a Pinball Maker



With pinball making a huge renewal across the country, Mild Giant wants to ensure that these timeless, gorgeous makers stay damage-free while being transferred. Oh, and we desire the people moving them to be safe, too.

In the beginning glance, pinball devices can appear frightening to move because of their fragility, weight, and size. Fortunately, our knowledgeable Giants have a few techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

Most of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either 2 or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State machines.

Later on makers have hinges and use a locking system to keep the headbox upright. There may likewise be 2 bolts inside as added safety, in case the latch is broken or mistakenly un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball machines, you have to eliminate the headbox rear gain access to panel to access to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, but gradually the secret may have been lost. Frequently, there is a screw keeping this panel in location.

Once inside, get rid of the bolts and unplug the large ports that have circuitry going down into the device. You might desire to label these ports to put them back in the ideal area, but they need to be different sizes, making it challenging to plug back improperly.

You can now remove the headbox completely, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Strong State Pinballs

For early Strong State Pinballs, you will need to eliminate the back glass. There is a lock located on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.

As soon as unlocked, eliminate the back glass by lifting it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.

Then, open the back box lamp panel by lifting the latch situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the light panel in order to swing it open.

Now that you are inside, you can remove the bolts, and any plugs that have wires going down into the device. You might wish to label these plugs to put them back in the right spot. You might not have to get rid of the plugs, as the circuitry should be long enough to enable the headbox to be folded down.

At this point, you can secure the light panel and change the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the machine. This is a simple setup and requires no tools.

If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise help keep the back glass in place.

You need to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Use the supplied key to unlock, and eliminate the back glass by raising it up from the bottom, and after that pulling it out from the bottom.

Next, you will require to eliminate the display screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.

Pinball Device legs are held in location by 8 bolts. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into.

These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this is the case, you will need to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You need to now have access to any nuts that might have been utilized. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.

Be sure to mark or remember which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.

You are now ready Homepage to transport your pinball machine. Before you load it, make sure you remove the pinballs so they don't bounce around during transport.

If you are moving the pinball using a van or SUV, it may be easier to remove the legs just prior to loading original site the machine. Grab a friend to help and have among you supporting the pinball, while the other gets rid of the more info front legs. Move the maker in, then get rid of the back legs. It is much simpler to pack the device front.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop unexpectedly!

For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it might be much easier to eliminate the legs simply prior to packing the machine. Grab a friend to help and have one of you supporting the pinball, while the other gets rid of the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *